氨氮去除剂
发布时间：2019/07/15 浏览：
次
产品概述 Product Description
氨氮去除剂是一种固体药剂，能够迅速分解水中的氨氮，加药后不会产生沉淀物，分解物也不会重新结合，故可广泛应用于含氨氮废水的处理，是一种新型的废水处理药剂。氨氮处理剂降低氨氮的效果好，由于其氧化性强，一般需要在生化的后端投加，也正因为其强氧化性，所以一经投加反应快，3-5分钟左右就可反应完全，直接把氨氮降解完毕。是目前市场上，氨氮去除效果可以的药剂。一般废水经过处理后，氨氮浓度都在中低阶段(≤500mg/L),均能达到排放标准。
可用于饮用水的净化和废水的处理净化。也可用于无线电印刷电路及不锈钢蚀刻行业作蚀刻剂。适应水体PH值范围广，为4~12， pH值范围6~10。
Ammonia nitrogen removal agent is a solid agent that can rapidly decompose ammonia nitrogen in water. It will notproduce precipitates after addition, and the decomposition products will not be recombined. Therefore, it can be widely used inthe treatment of wastewater containing ammonia nitrogen, and is a new type of wastewater. Treatment agent. The ammonianitrogen treatment agent has a remarkable effect of reducing ammonia nitrogen. Because of its strong oxidizing property, it isgenerally required to add it to the back end of biochemis-try. Because of its strong oxidizing property, it can be reacted quicklyafter about 3-5 minutes if it is added rapidly. Completely degraded ammonia nitrogen directly. It is an excellent agent forammonia nitrogen removal on the market. After the general wastewater is treated, the concentration of ammonia nitrogen is inthe middle and low stage (< 500mg/L), and all of them can meet the emission standards.
It can be used for purification of drinking water and treatment and purification of wastewater. It can also be used as anetchant in radio printed circuits and stainless steel etching industries. Adapt to the wide range of pH values of water, 4~12, thebest pH range is 6~ 10.
使用方法 Product Instructions
根据水质不同，可取少量的聚合氯化铁液体与原浊水在实验室做出小试，取得好的效果后，方可批量使用。
Depending on the water quality, a small amount of polyferric chloride liquid and the original turbid water can be taken inthe laboratory for a small test. After the good results are obtained, the amount can be used in batches.
包装与储存 Packaging and storage
产品采用25kg-1000kg塑料桶装，阴凉避光处保存，保质期一年。
技术指标 Technical indicators
推荐产品
